Skip to content
Mohammad Al-Araidah

Portfolio

Engineering work

Filter by the domain you care about. Every project is labeled as professional work, an independent engineering study, or personal product work — so there is never a question about what was done on the job and what was done to build capability.

Published projects

Showing 6 of 6 projects

Professional

High-Volume Manufacturing Scrap Reduction

Signify · Manufacturing / Quality

Structured root-cause analysis and statistical process control on high-volume production lines, cutting scrap 15% and holding it through control plans rather than operator vigilance.

SPCRCAPFMEAControl plans

Read the case study

Professional

Production Equipment Run-Off & Acceptance

Signify · Equipment / Quality

Translated an equipment specification into measurable acceptance criteria, ran vendor run-off, dispositioned a punch list, and held buy-off until process capability was demonstrated.

Equipment acceptanceRun-offCapabilityPunch list

Read the case study

Professional

End-to-End Manufacturing Process Validation for ERP Transformation

Flowserve · Manufacturing systems

Validated an engineer-to-order manufacturing process from customer order through engineering release, planning, procurement, production, quality and shipment — with an issue-closure gate that required objective evidence before sign-off.

SAP S/4HANAProcess validationGovernanceUAT

Read the case study

Independent Study

Supplier Qualification & FAT Strategy for a 1 MW Liquid Cooling Skid

Independent study · Data center cooling

Supplier qualification scoring, manufacturing readiness review, inspection and test plan, FAT protocol and shipment release for a hypothetical liquid-cooling skid — with every decision gate and its evidence stated.

Supplier qualityITPFATLiquid cooling

Read the case study

Independent Study

FAT Nonconformance Investigation — Cooling Skid Differential Pressure

Independent study · Data center cooling

A skid that reached only 78% of required differential pressure at design flow. Full D1–D8: containment, fishbone to 5-Why, validated root cause, corrective action, verification, prevention — and a shipment disposition that changes as evidence accumulates.

8DNCRRCAShipment disposition

Read the case study

Personal Product

AutoOps AI

Founder & product engineer · Manufacturing AI

A reasoning layer over fragmented manufacturing information — FMEA, CAPA, 5-Why, nonconformance tracking and quality reporting with beta workflows and a primarily mock-tested SAP connector; 35 discovery interviews and a 20-user pilot.

Product engineeringAIQuality workflowsSAP

Read the case study

End of filtered results

Try the engineering lab

Put an engineering decision to the test.

Explore layout, work design, quality, manufacturing ML and production flow in one fictional factory. All demonstrations are synthetic and separate from professional work.

Explore the factory

Roadmap

Planned and in progress

This portfolio is maintained as an accumulating body of work rather than a finished artifact. These are the next pieces, listed so the current scope is not mistaken for the full scope.

  • Production Layout Optimization Using Simulation

    Tenneco · Industrial engineering — $1.3M projected savings

    Manufacturing · Data

  • Reducing Operational Waiting with Prediction & Optimization

    The Walt Disney Company · Operations analytics

    Data · Manufacturing

  • Supplier Quality Analytics — Multi-Supplier SPC Dashboard

    Independent study · Cp/Cpk, NCR aging, defect Pareto, supplier risk

    Data · Quality

  • Designing a Readiness Framework for Multi-Site Transformation

    Independent framework · Governance, cadence, decision thresholds

    Programs · Systems

  • Factory Acceptance Strategy for Mission-Critical Switchgear

    Independent study · Electrical equipment acceptance

    Quality · Infrastructure

  • Manufacturing Quality at the Source — Supplier Quality Playbook

    Independent framework · Reusable templates across the quality lifecycle

    Quality